Sources
Literature
The publications behind the formulas, coefficients and methods in our programs.
Every formula and coefficient in our programs rests on a source. On this page you will find the 113 publications, handbooks, standards and databases cited in the bibliographies of the two programs. The equation, validation and limits of every calculation are described in detail in the literature document shipped with the programs.
JoseCast Suite calculation methods · 39
- R. Otis, Z.-K. Liu, “pycalphad: CALPHAD-based Computational Thermodynamics in Python”, J. Open Research Software 5(1), 2017.
- E. Povoden-Karadeniz, MatCalc thermodynamic steel database mc_fe v2.059, TU Wien, 2016 (ODbL 1.0).
- SGTE Solution Database SSOL2 (2001), steel1 extract (OpenCalphad example database)Used for validation only.
- J. R. Brown (ed.), Foseco Ferrous Foundryman's Handbook, Butterworth-Heinemann, 2000.
- R. C. Voigt et al., Fillability of Thin-Wall Steel Castings, Final Report, U.S. DOE / OSTI 801749.
- Japan Foundrymen's Society, J. JFS 49(12) 747, 1977.Thermal conductivity and specific heat of moulding sands.
- Mersin University, worked example of gating design (publish.mersin.edu.tr).
- M. C. Flemings, Solidification Processing, McGraw-Hill, 1974.Fluidity model.
- J. Campbell, Complete Casting Handbook, Elsevier, 2011.Fluidity and filling.
- Metals 2015, 5, 256 (doi:10.3390/met5010256).Comparison of austenite liquidus temperatures.
- Elkem, 72nd World Foundry Congress (2016), O-12.Pouring temperature and nodule count.
- H. S. Carslaw, J. C. Jaeger, Conduction of Heat in Solids, 2nd ed., Oxford, 1959.Semi-infinite medium with surface heat transfer.
- K. Narayan Prabhu, W. D. Griffiths, “Metal/mould interfacial heat transfer during solidification of cast iron in sand moulds”, Int. J. Cast Metals Research, 2001.
- “Density and surface tension of molten cast irons”, J. Mining and Metallurgy B: Metallurgy, 2021.
- TU Dresden GRK2802, “Effect of Sulfur on the Surface Tension of Low-Sulfur Manganese-Boron Steel”.
- Zhihu, 铸钢件浇注温度、速度及浇注操作要点汇总, zhuanlan.zhihu.com/p/346638841.Steel pouring temperature practice.
- Zhejiang IMEE, 铁模覆砂工艺参数调试手册, zj-imee.com/m/news/news_497.html.HT200 pouring temperature, 10–20 mm sections.
- Zhang Xin et al., 高液压射台前板球墨铸铁件铸造工艺设计, Foundry (铸造) 73(2), 2024.Pouring temperature of a heavy QT450 casting.
- Zhihu, 铸造合金材料及其熔炼, zhuanlan.zhihu.com/p/443174185.Pouring temperature range of grey cast iron.
- P. N. Rao, Manufacturing Technology, Vol. 1: Foundry, Forming and Welding, 2nd ed., Tata McGraw-Hill, 2002.Pouring time relations (metric).
- A. K. M. B. Rashid, MME 346 Foundry Engineering Sessional, Experiment 6A: Design of Gating and Feeding Systems, BUET, Appendix 1.Pouring time relations (fps).
- US Patent 8,733,424 B1, “Centrifugal casting method and apparatus”, equations (1)–(2).Fluidity and CE definition.
- Gating design and simulation of a flange roller, EasyChair Preprint (easychair.org/publications/paper/NJG).Worked example for steel.
- calculatoratoz.com, “Steel Castings Calculator”.Worked example for steel.
- W. Schmitz, D. Trauzeddel (Otto Junker GmbH), “The Melting, Holding and Pouring Process – Energy and Process-Related Aspects”.Theoretical and actual melting energy, furnace heat loss.
- J. F. Schifo, J. T. Radia, Theoretical/Best Practice Energy Use in Metalcasting Operations, U.S. DOE, 2004.Theoretical melting energy and furnace efficiencies.
- 《铸造实用技术问答》(2nd ed.), 4-22 “怎样根据浇注重量计算铸件的浇注时间”.Pouring time t = S·∛(δ·G); S 1.7–2.0 for cast iron, 1.4 for steel.
- “大型铸铁件浇注工艺研究及计算公式” / jishulink “浇铸时间如何确定”.Medium and large iron castings, with the average wall thickness.
- Scholer (after the table of Sobolev and Dubitsky), “Steel Pouring Times”.Ts = S·(V·G)^0.333.
- J. Kavuličová, D. Ivánová, J. Ďurišin, G. Sučik, M. Škrobian, “Calculation of liquidus temperature for steel by Le Châtelier-Shreder and van Laar-Bowen equations”, Kovove Materialy 44 (2006) 181–184.
- Rolled Alloys, 2205 Duplex Stainless data sheet.Melting range.
- Ö. Hammar, U. Svensson, “Influence of steel composition on segregation and microstructure during solidification of austenitic stainless steels”, Solidification and Casting of Metals, The Metals Society, London, 1979, 401–410.
- N. Suutala, “Effect of solidification conditions on the solidification mode in austenitic stainless steels”, Metallurgical Transactions A 14 (1983) 191–197.
- Heraeus Electro-Nite, thermal analysis of cast iron (IBT, “Thermal Analysis of Cast Iron”).T_L = 1623.6 − 112.36·(C + Si/4 + P/2).
- Steelmaking formula compilations (163.com “炼钢系统各种计算公式汇总”, sohu.com).1536 liquidus formula; original author not stated.
- K. Peaslee, V. Richards, J. Smith (Missouri University of Science and Technology), Melting Efficiency Improvement, Final Technical Report, U.S. DOE, OSTI 1051407, Table 3.Melt records of the example furnace shipped with the program.
- Heine, pouring time of ductile iron: t = A·√G, A = 1.7.Fill-time coefficient for ductile iron below 350 kg.
- Dietert: t = k·√w, k 1.0–1.5 (the smaller value for large castings).Square-root relation below 350 kg.
- Karsay: square-root pouring time relation, t = s·√G.Square-root relation below 350 kg (together with Dietert).
JoseCast Analyzer
Lattice Boltzmann, flow and free surface JoseCast Analyzer · 25
- Bhatnagar, P.L., Gross, E.P., Krook, M. (1954). A model for collision processes in gases. Phys. Rev. 94, 511–525.
- Bogner, S., Rüde, U., Harting, J. (2016). Curvature estimation from a volume-of-fluid indicator function for the simulation of surface tension and wetting with a free-surface lattice Boltzmann method. Phys. Rev. E 93, 043302.
- Bouzidi, M., Firdaouss, M., Lallemand, P. (2001). Momentum transfer of a Boltzmann-lattice fluid with boundaries. Phys. Fluids 13, 3452.
- Ding, H., Spelt, P.D.M. (2007). Wetting condition in diffuse interface simulations of contact line motion. Phys. Rev. E 75, 046708.
- Dojka, M., Jezierski, J., Szucki, M. (2022). Materials 15, 4937.
- Dupuis, A., Chopard, B. (2003). Theory and applications of an alternative lattice Boltzmann grid refinement algorithm. Phys. Rev. E 67, 066707.
- Ergun, S. (1952). Fluid flow through packed columns. Chem. Eng. Prog. 48, 89–94.
- Guo, Z., Zheng, C., Shi, B. (2002). Discrete lattice effects on the forcing term in the lattice Boltzmann method. Phys. Rev. E 65, 046308.
- Hou, S., Sterling, J., Chen, S., Doolen, G.D. (1996). A lattice Boltzmann subgrid model for high Reynolds number flows. Fields Inst. Commun. 6, 151–166.
- Huh, C., Scriven, L.E. (1971). Hydrodynamic model of steady movement of a solid/liquid/fluid contact line. J. Colloid Interface Sci. 35, 85–101.
- Körner, C., Thies, M., Hofmann, T., Thürey, N., Rüde, U. (2005). Lattice Boltzmann model for free surface flow for modeling foaming. J. Stat. Phys. 121, 179–196.
- Krüger, T. et al. (2017). The Lattice Boltzmann Method: Principles and Practice. Springer.
- Ladd, A.J.C. (1994). Numerical simulations of particulate suspensions via a discretized Boltzmann equation. Part 1. J. Fluid Mech. 271, 285–309.
- Latt, J., Chopard, B. (2006). Lattice Boltzmann method with regularized pre-collision distribution functions. Math. Comput. Simul. 72, 165–168.
- Malaspinas, O., Sagaut, P. (2014). Wall model for large-eddy simulation based on the lattice Boltzmann method. J. Comput. Phys. 275, 25–40.
- Pope, S.B. (2000). Turbulent Flows. Cambridge University Press.
- Qian, Y.H., d'Humières, D., Lallemand, P. (1992). Lattice BGK models for Navier–Stokes equation. Europhys. Lett. 17, 479–484.
- Rohde, M., Kandhai, D., Derksen, J.J., van den Akker, H.E.A. (2006). A generic, mass conservative local grid refinement technique for lattice-Boltzmann schemes. Int. J. Numer. Meth. Fluids 51, 439–468.
- Schornbaum, F., Rüde, U. (2016). Massively parallel algorithms for the lattice Boltzmann method on nonuniform grids. SIAM J. Sci. Comput. 38, C96–C126.
- Schwarzmeier, C. et al. (2022). Comparison of refilling schemes in the free-surface lattice Boltzmann method. AIP Advances 12, 115324.
- Schwarzmeier, C. et al. (2023). Analysis and comparison of boundary condition variants in the free-surface lattice Boltzmann method. Int. J. Numer. Methods Fluids.
- Smagorinsky, J. (1963). General circulation experiments with the primitive equations. Mon. Weather Rev. 91, 99–164.
- Spalding, D.B. (1961). A single formula for the law of the wall. J. Appl. Mech. 28, 455–458.
- Taniguchi, S., Maeda, Y. (2020). Mater. Trans. 61(10), 1981.
- Thürey, N. (2007). Physically based animation of free surface flows with the lattice Boltzmann method. PhD thesis, FAU Erlangen-Nürnberg.
Rheology, mushy zone and materials JoseCast Analyzer · 14
- Andrade, E.N. da C. (1934). A theory of the viscosity of liquids. Phil. Mag. 17, 497–511.
- Casson, N. (1959). A flow equation for pigment-oil suspensions of the printing ink type. Rheology of Disperse Systems, Pergamon.
- Cheng, D.C.-H., Evans, F. (1965). Br. J. Appl. Phys. 16, 1599.
- Cross, M.M. (1965). Rheology of non-Newtonian fluids: a new flow equation for pseudoplastic systems. J. Colloid Sci. 20, 417–437.
- Herschel, W.H., Bulkley, R. (1926). Konsistenzmessungen von Gummi-Benzollösungen. Kolloid-Z. 39, 291–300.
- Imagumbai, M. (1994). Relationship between primary- and secondary-dendrite arm spacing of C-Mn steel uni-directionally solidified in steady state. ISIJ Int. 34(12), 986–991.
- Moore, F. (1959). The rheology of ceramic slips and bodies. Trans. Br. Ceram. Soc. 58, 470–494.
- Mullineux, G. (2008). Non-linear least squares fitting of coefficients in the Herschel–Bulkley model. Appl. Math. Model. 32, 2538–2551.
- Schneider, M.C., Gu, J.P., Beckermann, C., Boettinger, W.J., Kattner, U.R. (1997). Modeling of micro- and macrosegregation and freckle formation in single-crystal nickel-base superalloy directional solidification. Metall. Mater. Trans. A 28, 1517–1531.
- Thomas, D.G. (1965). Transport characteristics of suspension: VIII. A note on the viscosity of Newtonian suspensions of uniform spherical particles. J. Colloid Sci. 20, 267–277.
- Torabi Rad, M., Kotas, P., Beckermann, C. (2013). Rayleigh number criterion for formation of A-segregates in steel castings and ingots. Metall. Mater. Trans. A 44(9), 4266–4281. DOI 10.1007/s11661-013-1761-4
- Voller, V.R., Prakash, C. (1987). A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems. Int. J. Heat Mass Transfer 30, 1709–1719.
- Yu et al. (2020). ISIJ International 60(8) (304/316 SDAS).
- Zhao et al. (2024). J. Mater. Res. Technol. 31, 635 (dendrite arm spacing of CrMo cast steel).
Heat transfer and solidification JoseCast Analyzer · 10
- Blazek, J. (2015). Computational Fluid Dynamics: Principles and Applications, 3rd ed. Elsevier.
- Bonacina, C., Comini, G., Fasano, A., Primicerio, M. (1973). Numerical solution of phase-change problems. Int. J. Heat Mass Transfer 16, 1825–1832.
- Carslaw, H.S., Jaeger, J.C. (1959). Conduction of Heat in Solids, 2nd ed. Oxford University Press.
- Chvorinov, N. (1940). Theorie der Erstarrung von Gußstücken. Giesserei 27, 177–186.
- Hestenes, M.R., Stiefel, E. (1952). Methods of conjugate gradients for solving linear systems. J. Res. Natl. Bur. Stand. 49, 409–436.
- Patankar, S.V. (1980). Numerical Heat Transfer and Fluid Flow. Hemisphere.
- Scheil, E. (1942). Bemerkungen zur Schichtkristallbildung. Z. Metallkd. 34, 70–72.
- Vergnano, A., Facondini, G., Morselli, A., Veronesi, P., Leali, F. (2024) (green sand metal–mould heat transfer coefficient).
- Voller, V.R., Swaminathan, C.R. (1991). General source-based method for solidification phase change. Numer. Heat Transfer B 19, 175–189.
- Williams, T.J., Hardin, R.A., Beckermann, C. (2016). Thermophysical properties and performance of riser sleeves for steel castings. Int. J. Metalcast. 10(4), 535–555.
Feeding, shrinkage, porosity JoseCast Analyzer · 6
- Campbell, J. Complete Casting Handbook. Butterworth-Heinemann.
- Carlson, K.D., Beckermann, C. (2009). Prediction of shrinkage pore volume fraction using a dimensionless Niyama criterion. Metall. Mater. Trans. A 40, 163–175.
- Heuver's inscribed circle rule (as given by Campbell).
- Niyama, E., Uchida, T., Morikawa, M., Saito, S. (1982). A method of shrinkage prediction and its application to steel casting practice. AFS Int. Cast Metals J. 7(3), 52–63.
- Ransley, C.E., Neufeld, H. (1948). The solubility of hydrogen in liquid and solid aluminium. J. Inst. Metals 74, 599–620.
- Wlodawer, R. (1966). Directional Solidification of Steel Castings. Pergamon.
Gas and sand JoseCast Analyzer · 5
- Klinkenberg, L.J. (1941). The permeability of porous media to liquids and gases. API Drilling and Production Practice, 200–213.
- Kozeny, J. (1927); Carman, P.C. (1937). Permeability relation for porous media.
- Shields, A. (1936). Anwendung der Ähnlichkeitsmechanik und der Turbulenzforschung auf die Geschiebebewegung. Berlin.
- Sutherland, W. (1893). The viscosity of gases and molecular force. Phil. Mag. 36, 507–531.
- Thole, J., Beckermann, C. (2010). Measurement of elastic modulus of PUNB bonded sand as a function of temperature. Int. J. Metalcasting 4(4), 7–18.
Erosion and cold shuts JoseCast Analyzer · 2
- Bitter, J.G.A. (1963). A study of erosion phenomena. Wear 6, 5–21, 169–190.
- Finnie, I. (1960). Erosion of surfaces by solid particles. Wear 3, 87–103.
Geometry and numerical algorithms JoseCast Analyzer · 5
- Beucher, S., Meyer, F. (1993). The morphological approach to segmentation: the watershed transformation. Mathematical Morphology in Image Processing, 433–481.
- Dijkstra, E.W. (1959). A note on two problems in connexion with graphs. Numer. Math. 1, 269–271.
- Felzenszwalb, P.F., Huttenlocher, D.P. (2012). Distance transforms of sampled functions. Theory of Computing 8, 415–428.
- Möller, T., Trumbore, B. (1997). Fast, minimum storage ray-triangle intersection. J. Graphics Tools 2(1), 21–28.
- Tarjan, R.E. (1975). Efficiency of a good but not linear set union algorithm. J. ACM 22, 215–225.
Standards and material publications JoseCast Analyzer · 6
- EN 1561:2011 (grey cast iron), EN 1563:2011 (ductile cast iron), EN 16079 (compacted graphite iron), EN 12513 (abrasion-resistant cast iron).
- EN 10083-2/-3, EN 10084, EN ISO 683-17, EN 10088, EN 10213, EN 10293, EN 10349, EN 10283; ASTM A128, A439, A532.
- Nickel Institute (2021). Properties and applications of Ni-Hard alloys (publication 11017, 2nd ed.).
- Nickel Institute. Properties and Applications of Ni-Resist and Ductile Ni-Resist Alloys (publication 11018).
- Aktaş Çelik, G. (2024). Simulation of the solidification behaviour and metallurgical characterisation of NiHard-4 white cast iron. J. Fac. Eng. Uludağ Univ. 29(2). DOI 10.17482/uumfd.1432823
- Roučka, J., Abramová, E., Kaňa, V. (2018). Properties of type SiMo ductile irons at high temperatures. Arch. Metall. Mater. 63(2), 601–607.
Thermodynamics JoseCast Analyzer · 1
- pycalphad (open-source CALPHAD library) and the TDB databases distributed with the program.
A few sources that are cited in the program code but whose full reference we could not find and verify are not included in this list. Until verified, they remain in the program's literature document marked "not verified".