JOSESOFT
出处

参考文献

我们程序中的公式、系数和方法背后的文献。

我们程序中的每个公式和系数都有出处。本页收录了两个程序参考文献中引用的 113 篇论文、手册、标准和数据库。每项计算的公式、验证和适用范围,在随程序提供的参考文献文档中有详细说明。

JoseCast Suite 计算方法 · 39

  1. R. Otis, Z.-K. Liu, “pycalphad: CALPHAD-based Computational Thermodynamics in Python”, J. Open Research Software 5(1), 2017.
  2. E. Povoden-Karadeniz, MatCalc thermodynamic steel database mc_fe v2.059, TU Wien, 2016 (ODbL 1.0).
  3. SGTE Solution Database SSOL2 (2001), steel1 摘录(OpenCalphad 示例数据库)仅用于验证。
  4. J. R. Brown (编), Foseco Ferrous Foundryman's Handbook, Butterworth-Heinemann, 2000.
  5. R. C. Voigt et al., Fillability of Thin-Wall Steel Castings, Final Report, U.S. DOE / OSTI 801749.
  6. Japan Foundrymen's Society, J. JFS 49(12) 747, 1977.型砂的导热系数和比热。
  7. 梅尔辛大学,浇注系统设计算例 (publish.mersin.edu.tr).
  8. M. C. Flemings, Solidification Processing, McGraw-Hill, 1974.流动性模型。
  9. J. Campbell, Complete Casting Handbook, Elsevier, 2011.流动性与充型。
  10. Metals 2015, 5, 256 (doi:10.3390/met5010256).奥氏体液相线温度比较。
  11. Elkem, 72nd World Foundry Congress (2016), O-12.浇注温度与石墨球数。
  12. H. S. Carslaw, J. C. Jaeger, Conduction of Heat in Solids, 第2版, Oxford, 1959.具有表面换热的半无限介质。
  13. K. Narayan Prabhu, W. D. Griffiths, “Metal/mould interfacial heat transfer during solidification of cast iron in sand moulds”, Int. J. Cast Metals Research, 2001.
  14. “Density and surface tension of molten cast irons”, J. Mining and Metallurgy B: Metallurgy, 2021.
  15. TU Dresden GRK2802, “Effect of Sulfur on the Surface Tension of Low-Sulfur Manganese-Boron Steel”.
  16. Zhihu, 铸钢件浇注温度、速度及浇注操作要点汇总, zhuanlan.zhihu.com/p/346638841.铸钢浇注温度实践。
  17. Zhejiang IMEE, 铁模覆砂工艺参数调试手册, zj-imee.com/m/news/news_497.html.HT200 浇注温度,壁厚 10–20 mm。
  18. Zhang Xin et al., 高液压射台前板球墨铸铁件铸造工艺设计, Foundry (铸造) 73(2), 2024.大型 QT450 铸件的浇注温度。
  19. Zhihu, 铸造合金材料及其熔炼, zhuanlan.zhihu.com/p/443174185.灰铸铁的浇注温度范围。
  20. P. N. Rao, Manufacturing Technology, Vol. 1: Foundry, Forming and Welding, 第2版, Tata McGraw-Hill, 2002.浇注时间关系式(公制)。
  21. A. K. M. B. Rashid, MME 346 Foundry Engineering Sessional, Experiment 6A: Design of Gating and Feeding Systems, BUET, Appendix 1.浇注时间关系式(fps 单位制)。
  22. US Patent 8,733,424 B1, “Centrifugal casting method and apparatus”, 式 (1)–(2).流动性与 CE 的定义。
  23. 法兰辊的浇注系统设计与模拟, EasyChair Preprint (easychair.org/publications/paper/NJG).铸钢算例。
  24. calculatoratoz.com, “Steel Castings Calculator”.铸钢算例。
  25. W. Schmitz, D. Trauzeddel (Otto Junker GmbH), “The Melting, Holding and Pouring Process – Energy and Process-Related Aspects”.理论与实际熔炼能量,熔炉热损失。
  26. J. F. Schifo, J. T. Radia, Theoretical/Best Practice Energy Use in Metalcasting Operations, U.S. DOE, 2004.理论熔炼能量与熔炉效率。
  27. 《铸造实用技术问答》(第2版), 4-22 “怎样根据浇注重量计算铸件的浇注时间”.浇注时间 t = S·∛(δ·G);铸铁 S 为 1.7–2.0,铸钢为 1.4。
  28. “大型铸铁件浇注工艺研究及计算公式” / jishulink “浇铸时间如何确定”.中大型铸铁件,采用平均壁厚。
  29. Scholer(依据 Sobolev 和 Dubitsky 的表), “Steel Pouring Times”.Ts = S·(V·G)^0.333。
  30. J. Kavuličová, D. Ivánová, J. Ďurišin, G. Sučik, M. Škrobian, “Calculation of liquidus temperature for steel by Le Châtelier-Shreder and van Laar-Bowen equations”, Kovove Materialy 44 (2006) 181–184.
  31. Rolled Alloys, 2205 Duplex Stainless 数据表.熔化范围。
  32. Ö. Hammar, U. Svensson, “Influence of steel composition on segregation and microstructure during solidification of austenitic stainless steels”, Solidification and Casting of Metals, The Metals Society, London, 1979, 401–410.
  33. N. Suutala, “Effect of solidification conditions on the solidification mode in austenitic stainless steels”, Metallurgical Transactions A 14 (1983) 191–197.
  34. Heraeus Electro-Nite, 铸铁热分析 (IBT, “Thermal Analysis of Cast Iron”).T_L = 1623.6 − 112.36·(C + Si/4 + P/2)。
  35. 炼钢公式汇编 (163.com “炼钢系统各种计算公式汇总”, sohu.com).1536 液相线公式;原作者未注明。
  36. K. Peaslee, V. Richards, J. Smith (Missouri University of Science and Technology), Melting Efficiency Improvement, Final Technical Report, U.S. DOE, OSTI 1051407, 表 3。随程序提供的示例熔炉的熔炼记录。
  37. Heine,球墨铸铁浇注时间:t = A·√G,A = 1.7。350 kg 以下球墨铸铁的浇注时间系数。
  38. Dietert:t = k·√w,k 1.0–1.5(大型铸件取小值)。350 kg 以下的平方根公式。
  39. Karsay:平方根浇注时间公式,t = s·√G。350 kg 以下的平方根公式(与 Dietert 一起)。

JoseCast Analyzer

格子玻尔兹曼、流动与自由表面 JoseCast Analyzer · 25

  1. Bhatnagar, P.L., Gross, E.P., Krook, M. (1954). A model for collision processes in gases. Phys. Rev. 94, 511–525.
  2. Bogner, S., Rüde, U., Harting, J. (2016). Curvature estimation from a volume-of-fluid indicator function for the simulation of surface tension and wetting with a free-surface lattice Boltzmann method. Phys. Rev. E 93, 043302.
  3. Bouzidi, M., Firdaouss, M., Lallemand, P. (2001). Momentum transfer of a Boltzmann-lattice fluid with boundaries. Phys. Fluids 13, 3452.
  4. Ding, H., Spelt, P.D.M. (2007). Wetting condition in diffuse interface simulations of contact line motion. Phys. Rev. E 75, 046708.
  5. Dojka, M., Jezierski, J., Szucki, M. (2022). Materials 15, 4937.
  6. Dupuis, A., Chopard, B. (2003). Theory and applications of an alternative lattice Boltzmann grid refinement algorithm. Phys. Rev. E 67, 066707.
  7. Ergun, S. (1952). Fluid flow through packed columns. Chem. Eng. Prog. 48, 89–94.
  8. Guo, Z., Zheng, C., Shi, B. (2002). Discrete lattice effects on the forcing term in the lattice Boltzmann method. Phys. Rev. E 65, 046308.
  9. Hou, S., Sterling, J., Chen, S., Doolen, G.D. (1996). A lattice Boltzmann subgrid model for high Reynolds number flows. Fields Inst. Commun. 6, 151–166.
  10. Huh, C., Scriven, L.E. (1971). Hydrodynamic model of steady movement of a solid/liquid/fluid contact line. J. Colloid Interface Sci. 35, 85–101.
  11. Körner, C., Thies, M., Hofmann, T., Thürey, N., Rüde, U. (2005). Lattice Boltzmann model for free surface flow for modeling foaming. J. Stat. Phys. 121, 179–196.
  12. Krüger, T. et al. (2017). The Lattice Boltzmann Method: Principles and Practice. Springer.
  13. Ladd, A.J.C. (1994). Numerical simulations of particulate suspensions via a discretized Boltzmann equation. Part 1. J. Fluid Mech. 271, 285–309.
  14. Latt, J., Chopard, B. (2006). Lattice Boltzmann method with regularized pre-collision distribution functions. Math. Comput. Simul. 72, 165–168.
  15. Malaspinas, O., Sagaut, P. (2014). Wall model for large-eddy simulation based on the lattice Boltzmann method. J. Comput. Phys. 275, 25–40.
  16. Pope, S.B. (2000). Turbulent Flows. Cambridge University Press.
  17. Qian, Y.H., d'Humières, D., Lallemand, P. (1992). Lattice BGK models for Navier–Stokes equation. Europhys. Lett. 17, 479–484.
  18. Rohde, M., Kandhai, D., Derksen, J.J., van den Akker, H.E.A. (2006). A generic, mass conservative local grid refinement technique for lattice-Boltzmann schemes. Int. J. Numer. Meth. Fluids 51, 439–468.
  19. Schornbaum, F., Rüde, U. (2016). Massively parallel algorithms for the lattice Boltzmann method on nonuniform grids. SIAM J. Sci. Comput. 38, C96–C126.
  20. Schwarzmeier, C. et al. (2022). Comparison of refilling schemes in the free-surface lattice Boltzmann method. AIP Advances 12, 115324.
  21. Schwarzmeier, C. et al. (2023). Analysis and comparison of boundary condition variants in the free-surface lattice Boltzmann method. Int. J. Numer. Methods Fluids.
  22. Smagorinsky, J. (1963). General circulation experiments with the primitive equations. Mon. Weather Rev. 91, 99–164.
  23. Spalding, D.B. (1961). A single formula for the law of the wall. J. Appl. Mech. 28, 455–458.
  24. Taniguchi, S., Maeda, Y. (2020). Mater. Trans. 61(10), 1981.
  25. Thürey, N. (2007). Physically based animation of free surface flows with the lattice Boltzmann method. 博士论文, FAU Erlangen-Nürnberg.

流变学、糊状区与材料 JoseCast Analyzer · 14

  1. Andrade, E.N. da C. (1934). A theory of the viscosity of liquids. Phil. Mag. 17, 497–511.
  2. Casson, N. (1959). A flow equation for pigment-oil suspensions of the printing ink type. Rheology of Disperse Systems, Pergamon.
  3. Cheng, D.C.-H., Evans, F. (1965). Br. J. Appl. Phys. 16, 1599.
  4. Cross, M.M. (1965). Rheology of non-Newtonian fluids: a new flow equation for pseudoplastic systems. J. Colloid Sci. 20, 417–437.
  5. Herschel, W.H., Bulkley, R. (1926). Konsistenzmessungen von Gummi-Benzollösungen. Kolloid-Z. 39, 291–300.
  6. Imagumbai, M. (1994). Relationship between primary- and secondary-dendrite arm spacing of C-Mn steel uni-directionally solidified in steady state. ISIJ Int. 34(12), 986–991.
  7. Moore, F. (1959). The rheology of ceramic slips and bodies. Trans. Br. Ceram. Soc. 58, 470–494.
  8. Mullineux, G. (2008). Non-linear least squares fitting of coefficients in the Herschel–Bulkley model. Appl. Math. Model. 32, 2538–2551.
  9. Schneider, M.C., Gu, J.P., Beckermann, C., Boettinger, W.J., Kattner, U.R. (1997). Modeling of micro- and macrosegregation and freckle formation in single-crystal nickel-base superalloy directional solidification. Metall. Mater. Trans. A 28, 1517–1531.
  10. Thomas, D.G. (1965). Transport characteristics of suspension: VIII. A note on the viscosity of Newtonian suspensions of uniform spherical particles. J. Colloid Sci. 20, 267–277.
  11. Torabi Rad, M., Kotas, P., Beckermann, C. (2013). Rayleigh number criterion for formation of A-segregates in steel castings and ingots. Metall. Mater. Trans. A 44(9), 4266–4281. DOI 10.1007/s11661-013-1761-4
  12. Voller, V.R., Prakash, C. (1987). A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems. Int. J. Heat Mass Transfer 30, 1709–1719.
  13. Yu et al. (2020). ISIJ International 60(8) (304/316 SDAS).
  14. Zhao et al. (2024). J. Mater. Res. Technol. 31, 635 (CrMo 铸钢的枝晶臂间距).

传热与凝固 JoseCast Analyzer · 10

  1. Blazek, J. (2015). Computational Fluid Dynamics: Principles and Applications, 第3版. Elsevier.
  2. Bonacina, C., Comini, G., Fasano, A., Primicerio, M. (1973). Numerical solution of phase-change problems. Int. J. Heat Mass Transfer 16, 1825–1832.
  3. Carslaw, H.S., Jaeger, J.C. (1959). Conduction of Heat in Solids, 2nd ed. Oxford University Press.
  4. Chvorinov, N. (1940). Theorie der Erstarrung von Gußstücken. Giesserei 27, 177–186.
  5. Hestenes, M.R., Stiefel, E. (1952). Methods of conjugate gradients for solving linear systems. J. Res. Natl. Bur. Stand. 49, 409–436.
  6. Patankar, S.V. (1980). Numerical Heat Transfer and Fluid Flow. Hemisphere.
  7. Scheil, E. (1942). Bemerkungen zur Schichtkristallbildung. Z. Metallkd. 34, 70–72.
  8. Vergnano, A., Facondini, G., Morselli, A., Veronesi, P., Leali, F. (2024) (湿型砂金属–铸型界面换热系数).
  9. Voller, V.R., Swaminathan, C.R. (1991). General source-based method for solidification phase change. Numer. Heat Transfer B 19, 175–189.
  10. Williams, T.J., Hardin, R.A., Beckermann, C. (2016). Thermophysical properties and performance of riser sleeves for steel castings. Int. J. Metalcast. 10(4), 535–555.

补缩、缩孔、气孔 JoseCast Analyzer · 6

  1. Campbell, J. Complete Casting Handbook. Butterworth-Heinemann.
  2. Carlson, K.D., Beckermann, C. (2009). Prediction of shrinkage pore volume fraction using a dimensionless Niyama criterion. Metall. Mater. Trans. A 40, 163–175.
  3. Heuver 内切圆法则(据 Campbell 的介绍)。
  4. Niyama, E., Uchida, T., Morikawa, M., Saito, S. (1982). A method of shrinkage prediction and its application to steel casting practice. AFS Int. Cast Metals J. 7(3), 52–63.
  5. Ransley, C.E., Neufeld, H. (1948). The solubility of hydrogen in liquid and solid aluminium. J. Inst. Metals 74, 599–620.
  6. Wlodawer, R. (1966). Directional Solidification of Steel Castings. Pergamon.

气体与型砂 JoseCast Analyzer · 5

  1. Klinkenberg, L.J. (1941). The permeability of porous media to liquids and gases. API Drilling and Production Practice, 200–213.
  2. Kozeny, J. (1927); Carman, P.C. (1937). 多孔介质渗透率关系式。
  3. Shields, A. (1936). Anwendung der Ähnlichkeitsmechanik und der Turbulenzforschung auf die Geschiebebewegung. Berlin.
  4. Sutherland, W. (1893). The viscosity of gases and molecular force. Phil. Mag. 36, 507–531.
  5. Thole, J., Beckermann, C. (2010). Measurement of elastic modulus of PUNB bonded sand as a function of temperature. Int. J. Metalcasting 4(4), 7–18.

冲蚀与冷隔 JoseCast Analyzer · 2

  1. Bitter, J.G.A. (1963). A study of erosion phenomena. Wear 6, 5–21, 169–190.
  2. Finnie, I. (1960). Erosion of surfaces by solid particles. Wear 3, 87–103.

几何与数值算法 JoseCast Analyzer · 5

  1. Beucher, S., Meyer, F. (1993). The morphological approach to segmentation: the watershed transformation. Mathematical Morphology in Image Processing, 433–481.
  2. Dijkstra, E.W. (1959). A note on two problems in connexion with graphs. Numer. Math. 1, 269–271.
  3. Felzenszwalb, P.F., Huttenlocher, D.P. (2012). Distance transforms of sampled functions. Theory of Computing 8, 415–428.
  4. Möller, T., Trumbore, B. (1997). Fast, minimum storage ray-triangle intersection. J. Graphics Tools 2(1), 21–28.
  5. Tarjan, R.E. (1975). Efficiency of a good but not linear set union algorithm. J. ACM 22, 215–225.

标准与材料出版物 JoseCast Analyzer · 6

  1. EN 1561:2011 (灰铸铁), EN 1563:2011 (球墨铸铁), EN 16079 (蠕墨铸铁), EN 12513 (耐磨铸铁).
  2. EN 10083-2/-3, EN 10084, EN ISO 683-17, EN 10088, EN 10213, EN 10293, EN 10349, EN 10283; ASTM A128, A439, A532.
  3. Nickel Institute (2021). Properties and applications of Ni-Hard alloys (出版物 11017,第2版).
  4. Nickel Institute. Properties and Applications of Ni-Resist and Ductile Ni-Resist Alloys (出版物 11018).
  5. Aktaş Çelik, G. (2024). Simulation of the solidification behaviour and metallurgical characterisation of NiHard-4 white cast iron. J. Fac. Eng. Uludağ Univ. 29(2). DOI 10.17482/uumfd.1432823
  6. Roučka, J., Abramová, E., Kaňa, V. (2018). Properties of type SiMo ductile irons at high temperatures. Arch. Metall. Mater. 63(2), 601–607.

热力学 JoseCast Analyzer · 1

  1. pycalphad(开源 CALPHAD 库)及随程序分发的 TDB 数据库。

少数在程序代码中被引用、但我们未能找到并核实完整文献信息的出处,没有列入本列表。在核实之前,它们在程序的参考文献文档中标注为“未核实”。