JOSESOFT
출처

참고 문헌

프로그램의 공식, 계수, 방법 뒤에 있는 문헌.

프로그램의 모든 공식과 계수는 출처에 근거합니다. 이 페이지에는 두 프로그램의 참고 문헌에 인용된 113건의 논문, 핸드북, 표준, 데이터베이스가 있습니다. 각 계산의 식, 검증, 한계는 프로그램과 함께 제공되는 참고 문헌 문서에 자세히 설명되어 있습니다.

JoseCast Suite 계산 방법 · 39

  1. R. Otis, Z.-K. Liu, “pycalphad: CALPHAD-based Computational Thermodynamics in Python”, J. Open Research Software 5(1), 2017.
  2. E. Povoden-Karadeniz, MatCalc thermodynamic steel database mc_fe v2.059, TU Wien, 2016 (ODbL 1.0).
  3. SGTE Solution Database SSOL2 (2001), steel1 발췌(OpenCalphad 예제 데이터베이스)검증에만 사용.
  4. J. R. Brown (편), Foseco Ferrous Foundryman's Handbook, Butterworth-Heinemann, 2000.
  5. R. C. Voigt et al., Fillability of Thin-Wall Steel Castings, Final Report, U.S. DOE / OSTI 801749.
  6. Japan Foundrymen's Society, J. JFS 49(12) 747, 1977.주물사의 열전도율과 비열.
  7. 메르신 대학교, 탕구 방안 설계 계산 예제 (publish.mersin.edu.tr).
  8. M. C. Flemings, Solidification Processing, McGraw-Hill, 1974.유동성 모델.
  9. J. Campbell, Complete Casting Handbook, Elsevier, 2011.유동성과 충전.
  10. Metals 2015, 5, 256 (doi:10.3390/met5010256).오스테나이트 액상선 온도 비교.
  11. Elkem, 72nd World Foundry Congress (2016), O-12.주입 온도와 흑연 구상 수.
  12. H. S. Carslaw, J. C. Jaeger, Conduction of Heat in Solids, 제2판, Oxford, 1959.표면 열전달이 있는 반무한 매질.
  13. K. Narayan Prabhu, W. D. Griffiths, “Metal/mould interfacial heat transfer during solidification of cast iron in sand moulds”, Int. J. Cast Metals Research, 2001.
  14. “Density and surface tension of molten cast irons”, J. Mining and Metallurgy B: Metallurgy, 2021.
  15. TU Dresden GRK2802, “Effect of Sulfur on the Surface Tension of Low-Sulfur Manganese-Boron Steel”.
  16. Zhihu, 铸钢件浇注温度、速度及浇注操作要点汇总, zhuanlan.zhihu.com/p/346638841.강 주입 온도 실무.
  17. Zhejiang IMEE, 铁模覆砂工艺参数调试手册, zj-imee.com/m/news/news_497.html.HT200 주입 온도, 단면 10–20 mm.
  18. Zhang Xin et al., 高液压射台前板球墨铸铁件铸造工艺设计, Foundry (铸造) 73(2), 2024.대형 QT450 주물의 주입 온도.
  19. Zhihu, 铸造合金材料及其熔炼, zhuanlan.zhihu.com/p/443174185.회주철의 주입 온도 범위.
  20. P. N. Rao, Manufacturing Technology, Vol. 1: Foundry, Forming and Welding, 제2판, Tata McGraw-Hill, 2002.주입 시간 관계식(미터법).
  21. A. K. M. B. Rashid, MME 346 Foundry Engineering Sessional, Experiment 6A: Design of Gating and Feeding Systems, BUET, Appendix 1.주입 시간 관계식(fps 단위).
  22. US Patent 8,733,424 B1, “Centrifugal casting method and apparatus”, 식 (1)–(2).유동성과 CE 정의.
  23. 플랜지 롤러의 탕구 방안 설계와 시뮬레이션, EasyChair Preprint (easychair.org/publications/paper/NJG).강 계산 예제.
  24. calculatoratoz.com, “Steel Castings Calculator”.강 계산 예제.
  25. W. Schmitz, D. Trauzeddel (Otto Junker GmbH), “The Melting, Holding and Pouring Process – Energy and Process-Related Aspects”.이론 및 실제 용해 에너지, 노 열손실.
  26. J. F. Schifo, J. T. Radia, Theoretical/Best Practice Energy Use in Metalcasting Operations, U.S. DOE, 2004.이론 용해 에너지와 노 효율.
  27. 《铸造实用技术问答》(제2판), 4-22 “怎样根据浇注重量计算铸件的浇注时间”.주입 시간 t = S·∛(δ·G); S는 주철 1.7–2.0, 강 1.4.
  28. “大型铸铁件浇注工艺研究及计算公式” / jishulink “浇铸时间如何确定”.중대형 철 주물, 평균 벽 두께 사용.
  29. Scholer(Sobolev와 Dubitsky의 표에 근거), “Steel Pouring Times”.Ts = S·(V·G)^0.333.
  30. J. Kavuličová, D. Ivánová, J. Ďurišin, G. Sučik, M. Škrobian, “Calculation of liquidus temperature for steel by Le Châtelier-Shreder and van Laar-Bowen equations”, Kovove Materialy 44 (2006) 181–184.
  31. Rolled Alloys, 2205 Duplex Stainless 데이터 시트.용융 범위.
  32. Ö. Hammar, U. Svensson, “Influence of steel composition on segregation and microstructure during solidification of austenitic stainless steels”, Solidification and Casting of Metals, The Metals Society, London, 1979, 401–410.
  33. N. Suutala, “Effect of solidification conditions on the solidification mode in austenitic stainless steels”, Metallurgical Transactions A 14 (1983) 191–197.
  34. Heraeus Electro-Nite, 주철의 열분석 (IBT, “Thermal Analysis of Cast Iron”).T_L = 1623.6 − 112.36·(C + Si/4 + P/2).
  35. 제강 공식 모음 (163.com “炼钢系统各种计算公式汇总”, sohu.com).1536 액상선 공식; 원저자 미기재.
  36. K. Peaslee, V. Richards, J. Smith (Missouri University of Science and Technology), Melting Efficiency Improvement, Final Technical Report, U.S. DOE, OSTI 1051407, 표 3.프로그램에 포함된 예제 노의 용해 기록.
  37. Heine, 구상흑연주철 주입 시간: t = A·√G, A = 1.7.350 kg 미만 구상흑연주철의 주입 시간 계수.
  38. Dietert: t = k·√w, k 1.0–1.5 (대형 주물에서는 작은 값).350 kg 미만 제곱근 식.
  39. Karsay: 제곱근 주입 시간 식, t = s·√G.350 kg 미만 제곱근 식(Dietert와 함께).

JoseCast Analyzer

격자 볼츠만법, 유동과 자유 표면 JoseCast Analyzer · 25

  1. Bhatnagar, P.L., Gross, E.P., Krook, M. (1954). A model for collision processes in gases. Phys. Rev. 94, 511–525.
  2. Bogner, S., Rüde, U., Harting, J. (2016). Curvature estimation from a volume-of-fluid indicator function for the simulation of surface tension and wetting with a free-surface lattice Boltzmann method. Phys. Rev. E 93, 043302.
  3. Bouzidi, M., Firdaouss, M., Lallemand, P. (2001). Momentum transfer of a Boltzmann-lattice fluid with boundaries. Phys. Fluids 13, 3452.
  4. Ding, H., Spelt, P.D.M. (2007). Wetting condition in diffuse interface simulations of contact line motion. Phys. Rev. E 75, 046708.
  5. Dojka, M., Jezierski, J., Szucki, M. (2022). Materials 15, 4937.
  6. Dupuis, A., Chopard, B. (2003). Theory and applications of an alternative lattice Boltzmann grid refinement algorithm. Phys. Rev. E 67, 066707.
  7. Ergun, S. (1952). Fluid flow through packed columns. Chem. Eng. Prog. 48, 89–94.
  8. Guo, Z., Zheng, C., Shi, B. (2002). Discrete lattice effects on the forcing term in the lattice Boltzmann method. Phys. Rev. E 65, 046308.
  9. Hou, S., Sterling, J., Chen, S., Doolen, G.D. (1996). A lattice Boltzmann subgrid model for high Reynolds number flows. Fields Inst. Commun. 6, 151–166.
  10. Huh, C., Scriven, L.E. (1971). Hydrodynamic model of steady movement of a solid/liquid/fluid contact line. J. Colloid Interface Sci. 35, 85–101.
  11. Körner, C., Thies, M., Hofmann, T., Thürey, N., Rüde, U. (2005). Lattice Boltzmann model for free surface flow for modeling foaming. J. Stat. Phys. 121, 179–196.
  12. Krüger, T. et al. (2017). The Lattice Boltzmann Method: Principles and Practice. Springer.
  13. Ladd, A.J.C. (1994). Numerical simulations of particulate suspensions via a discretized Boltzmann equation. Part 1. J. Fluid Mech. 271, 285–309.
  14. Latt, J., Chopard, B. (2006). Lattice Boltzmann method with regularized pre-collision distribution functions. Math. Comput. Simul. 72, 165–168.
  15. Malaspinas, O., Sagaut, P. (2014). Wall model for large-eddy simulation based on the lattice Boltzmann method. J. Comput. Phys. 275, 25–40.
  16. Pope, S.B. (2000). Turbulent Flows. Cambridge University Press.
  17. Qian, Y.H., d'Humières, D., Lallemand, P. (1992). Lattice BGK models for Navier–Stokes equation. Europhys. Lett. 17, 479–484.
  18. Rohde, M., Kandhai, D., Derksen, J.J., van den Akker, H.E.A. (2006). A generic, mass conservative local grid refinement technique for lattice-Boltzmann schemes. Int. J. Numer. Meth. Fluids 51, 439–468.
  19. Schornbaum, F., Rüde, U. (2016). Massively parallel algorithms for the lattice Boltzmann method on nonuniform grids. SIAM J. Sci. Comput. 38, C96–C126.
  20. Schwarzmeier, C. et al. (2022). Comparison of refilling schemes in the free-surface lattice Boltzmann method. AIP Advances 12, 115324.
  21. Schwarzmeier, C. et al. (2023). Analysis and comparison of boundary condition variants in the free-surface lattice Boltzmann method. Int. J. Numer. Methods Fluids.
  22. Smagorinsky, J. (1963). General circulation experiments with the primitive equations. Mon. Weather Rev. 91, 99–164.
  23. Spalding, D.B. (1961). A single formula for the law of the wall. J. Appl. Mech. 28, 455–458.
  24. Taniguchi, S., Maeda, Y. (2020). Mater. Trans. 61(10), 1981.
  25. Thürey, N. (2007). Physically based animation of free surface flows with the lattice Boltzmann method. 박사학위 논문, FAU Erlangen-Nürnberg.

유변학, 고액 공존 영역과 재료 JoseCast Analyzer · 14

  1. Andrade, E.N. da C. (1934). A theory of the viscosity of liquids. Phil. Mag. 17, 497–511.
  2. Casson, N. (1959). A flow equation for pigment-oil suspensions of the printing ink type. Rheology of Disperse Systems, Pergamon.
  3. Cheng, D.C.-H., Evans, F. (1965). Br. J. Appl. Phys. 16, 1599.
  4. Cross, M.M. (1965). Rheology of non-Newtonian fluids: a new flow equation for pseudoplastic systems. J. Colloid Sci. 20, 417–437.
  5. Herschel, W.H., Bulkley, R. (1926). Konsistenzmessungen von Gummi-Benzollösungen. Kolloid-Z. 39, 291–300.
  6. Imagumbai, M. (1994). Relationship between primary- and secondary-dendrite arm spacing of C-Mn steel uni-directionally solidified in steady state. ISIJ Int. 34(12), 986–991.
  7. Moore, F. (1959). The rheology of ceramic slips and bodies. Trans. Br. Ceram. Soc. 58, 470–494.
  8. Mullineux, G. (2008). Non-linear least squares fitting of coefficients in the Herschel–Bulkley model. Appl. Math. Model. 32, 2538–2551.
  9. Schneider, M.C., Gu, J.P., Beckermann, C., Boettinger, W.J., Kattner, U.R. (1997). Modeling of micro- and macrosegregation and freckle formation in single-crystal nickel-base superalloy directional solidification. Metall. Mater. Trans. A 28, 1517–1531.
  10. Thomas, D.G. (1965). Transport characteristics of suspension: VIII. A note on the viscosity of Newtonian suspensions of uniform spherical particles. J. Colloid Sci. 20, 267–277.
  11. Torabi Rad, M., Kotas, P., Beckermann, C. (2013). Rayleigh number criterion for formation of A-segregates in steel castings and ingots. Metall. Mater. Trans. A 44(9), 4266–4281. DOI 10.1007/s11661-013-1761-4
  12. Voller, V.R., Prakash, C. (1987). A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems. Int. J. Heat Mass Transfer 30, 1709–1719.
  13. Yu et al. (2020). ISIJ International 60(8) (304/316 SDAS).
  14. Zhao et al. (2024). J. Mater. Res. Technol. 31, 635 (CrMo 주강의 수지상정 가지 간격).

열전달과 응고 JoseCast Analyzer · 10

  1. Blazek, J. (2015). Computational Fluid Dynamics: Principles and Applications, 제3판. Elsevier.
  2. Bonacina, C., Comini, G., Fasano, A., Primicerio, M. (1973). Numerical solution of phase-change problems. Int. J. Heat Mass Transfer 16, 1825–1832.
  3. Carslaw, H.S., Jaeger, J.C. (1959). Conduction of Heat in Solids, 2nd ed. Oxford University Press.
  4. Chvorinov, N. (1940). Theorie der Erstarrung von Gußstücken. Giesserei 27, 177–186.
  5. Hestenes, M.R., Stiefel, E. (1952). Methods of conjugate gradients for solving linear systems. J. Res. Natl. Bur. Stand. 49, 409–436.
  6. Patankar, S.V. (1980). Numerical Heat Transfer and Fluid Flow. Hemisphere.
  7. Scheil, E. (1942). Bemerkungen zur Schichtkristallbildung. Z. Metallkd. 34, 70–72.
  8. Vergnano, A., Facondini, G., Morselli, A., Veronesi, P., Leali, F. (2024) (생사형의 금속–주형 열전달 계수).
  9. Voller, V.R., Swaminathan, C.R. (1991). General source-based method for solidification phase change. Numer. Heat Transfer B 19, 175–189.
  10. Williams, T.J., Hardin, R.A., Beckermann, C. (2016). Thermophysical properties and performance of riser sleeves for steel castings. Int. J. Metalcast. 10(4), 535–555.

보급, 수축공, 기공 JoseCast Analyzer · 6

  1. Campbell, J. Complete Casting Handbook. Butterworth-Heinemann.
  2. Carlson, K.D., Beckermann, C. (2009). Prediction of shrinkage pore volume fraction using a dimensionless Niyama criterion. Metall. Mater. Trans. A 40, 163–175.
  3. Heuver 내접원 규칙(Campbell의 소개에 따름).
  4. Niyama, E., Uchida, T., Morikawa, M., Saito, S. (1982). A method of shrinkage prediction and its application to steel casting practice. AFS Int. Cast Metals J. 7(3), 52–63.
  5. Ransley, C.E., Neufeld, H. (1948). The solubility of hydrogen in liquid and solid aluminium. J. Inst. Metals 74, 599–620.
  6. Wlodawer, R. (1966). Directional Solidification of Steel Castings. Pergamon.

가스와 모래 JoseCast Analyzer · 5

  1. Klinkenberg, L.J. (1941). The permeability of porous media to liquids and gases. API Drilling and Production Practice, 200–213.
  2. Kozeny, J. (1927); Carman, P.C. (1937). 다공성 매질의 투과율 관계식.
  3. Shields, A. (1936). Anwendung der Ähnlichkeitsmechanik und der Turbulenzforschung auf die Geschiebebewegung. Berlin.
  4. Sutherland, W. (1893). The viscosity of gases and molecular force. Phil. Mag. 36, 507–531.
  5. Thole, J., Beckermann, C. (2010). Measurement of elastic modulus of PUNB bonded sand as a function of temperature. Int. J. Metalcasting 4(4), 7–18.

침식과 탕경 JoseCast Analyzer · 2

  1. Bitter, J.G.A. (1963). A study of erosion phenomena. Wear 6, 5–21, 169–190.
  2. Finnie, I. (1960). Erosion of surfaces by solid particles. Wear 3, 87–103.

형상과 수치 알고리즘 JoseCast Analyzer · 5

  1. Beucher, S., Meyer, F. (1993). The morphological approach to segmentation: the watershed transformation. Mathematical Morphology in Image Processing, 433–481.
  2. Dijkstra, E.W. (1959). A note on two problems in connexion with graphs. Numer. Math. 1, 269–271.
  3. Felzenszwalb, P.F., Huttenlocher, D.P. (2012). Distance transforms of sampled functions. Theory of Computing 8, 415–428.
  4. Möller, T., Trumbore, B. (1997). Fast, minimum storage ray-triangle intersection. J. Graphics Tools 2(1), 21–28.
  5. Tarjan, R.E. (1975). Efficiency of a good but not linear set union algorithm. J. ACM 22, 215–225.

표준과 재료 간행물 JoseCast Analyzer · 6

  1. EN 1561:2011 (회주철), EN 1563:2011 (구상흑연주철), EN 16079 (CV 흑연주철), EN 12513 (내마모 주철).
  2. EN 10083-2/-3, EN 10084, EN ISO 683-17, EN 10088, EN 10213, EN 10293, EN 10349, EN 10283; ASTM A128, A439, A532.
  3. Nickel Institute (2021). Properties and applications of Ni-Hard alloys (간행물 11017, 제2판).
  4. Nickel Institute. Properties and Applications of Ni-Resist and Ductile Ni-Resist Alloys (간행물 11018).
  5. Aktaş Çelik, G. (2024). Simulation of the solidification behaviour and metallurgical characterisation of NiHard-4 white cast iron. J. Fac. Eng. Uludağ Univ. 29(2). DOI 10.17482/uumfd.1432823
  6. Roučka, J., Abramová, E., Kaňa, V. (2018). Properties of type SiMo ductile irons at high temperatures. Arch. Metall. Mater. 63(2), 601–607.

열역학 JoseCast Analyzer · 1

  1. pycalphad(오픈 소스 CALPHAD 라이브러리)와 프로그램과 함께 배포되는 TDB 데이터베이스.

프로그램 코드에 인용되었지만 완전한 서지 정보를 찾아 확인하지 못한 일부 출처는 이 목록에 포함하지 않았습니다. 확인될 때까지 이들은 프로그램의 참고 문헌 문서에 "미확인"으로 표시되어 남습니다.