JOSESOFT
Quellen

Literatur

Die Veröffentlichungen hinter den Formeln, Koeffizienten und Methoden unserer Programme.

Jede Formel und jeder Koeffizient in unseren Programmen beruht auf einer Quelle. Auf dieser Seite finden Sie die 113 Veröffentlichungen, Handbücher, Normen und Datenbanken, die in den Literaturverzeichnissen der beiden Programme zitiert werden. Gleichung, Validierung und Grenzen jeder Berechnung sind im mitgelieferten Literaturdokument der Programme ausführlich beschrieben.

JoseCast Suite Berechnungsverfahren · 39

  1. R. Otis, Z.-K. Liu, “pycalphad: CALPHAD-based Computational Thermodynamics in Python”, J. Open Research Software 5(1), 2017.
  2. E. Povoden-Karadeniz, MatCalc thermodynamic steel database mc_fe v2.059, TU Wien, 2016 (ODbL 1.0).
  3. SGTE Solution Database SSOL2 (2001), steel1-Auszug (OpenCalphad-Beispieldatenbank)Nur zur Validierung verwendet.
  4. J. R. Brown (Hrsg.), Foseco Ferrous Foundryman's Handbook, Butterworth-Heinemann, 2000.
  5. R. C. Voigt et al., Fillability of Thin-Wall Steel Castings, Final Report, U.S. DOE / OSTI 801749.
  6. Japan Foundrymen's Society, J. JFS 49(12) 747, 1977.Wärmeleitfähigkeit und spezifische Wärme von Formsanden.
  7. Universität Mersin, Rechenbeispiel zur Anschnittauslegung (publish.mersin.edu.tr).
  8. M. C. Flemings, Solidification Processing, McGraw-Hill, 1974.Fließvermögensmodell.
  9. J. Campbell, Complete Casting Handbook, Elsevier, 2011.Fließvermögen und Formfüllung.
  10. Metals 2015, 5, 256 (doi:10.3390/met5010256).Vergleich der Liquidustemperaturen von Austenit.
  11. Elkem, 72nd World Foundry Congress (2016), O-12.Gießtemperatur und Kugelzahl.
  12. H. S. Carslaw, J. C. Jaeger, Conduction of Heat in Solids, 2. Aufl., Oxford, 1959.Halbunendliches Medium mit Wärmeübergang an der Oberfläche.
  13. K. Narayan Prabhu, W. D. Griffiths, “Metal/mould interfacial heat transfer during solidification of cast iron in sand moulds”, Int. J. Cast Metals Research, 2001.
  14. “Density and surface tension of molten cast irons”, J. Mining and Metallurgy B: Metallurgy, 2021.
  15. TU Dresden GRK2802, “Effect of Sulfur on the Surface Tension of Low-Sulfur Manganese-Boron Steel”.
  16. Zhihu, 铸钢件浇注温度、速度及浇注操作要点汇总, zhuanlan.zhihu.com/p/346638841.Praxis der Gießtemperatur für Stahl.
  17. Zhejiang IMEE, 铁模覆砂工艺参数调试手册, zj-imee.com/m/news/news_497.html.Gießtemperatur von HT200, Wanddicken 10–20 mm.
  18. Zhang Xin et al., 高液压射台前板球墨铸铁件铸造工艺设计, Foundry (铸造) 73(2), 2024.Gießtemperatur eines schweren QT450-Gussteils.
  19. Zhihu, 铸造合金材料及其熔炼, zhuanlan.zhihu.com/p/443174185.Gießtemperaturbereich von Grauguss.
  20. P. N. Rao, Manufacturing Technology, Vol. 1: Foundry, Forming and Welding, 2. Aufl., Tata McGraw-Hill, 2002.Gießzeitbeziehungen (metrisch).
  21. A. K. M. B. Rashid, MME 346 Foundry Engineering Sessional, Experiment 6A: Design of Gating and Feeding Systems, BUET, Appendix 1.Gießzeitbeziehungen (fps).
  22. US Patent 8,733,424 B1, “Centrifugal casting method and apparatus”, Gleichungen (1)–(2).Fließvermögen und Definition des CE.
  23. Anschnittauslegung und Simulation einer Flanschrolle, EasyChair Preprint (easychair.org/publications/paper/NJG).Rechenbeispiel für Stahl.
  24. calculatoratoz.com, “Steel Castings Calculator”.Rechenbeispiel für Stahl.
  25. W. Schmitz, D. Trauzeddel (Otto Junker GmbH), “The Melting, Holding and Pouring Process – Energy and Process-Related Aspects”.Theoretische und tatsächliche Schmelzenergie, Wärmeverlust des Ofens.
  26. J. F. Schifo, J. T. Radia, Theoretical/Best Practice Energy Use in Metalcasting Operations, U.S. DOE, 2004.Theoretische Schmelzenergie und Ofenwirkungsgrade.
  27. 《铸造实用技术问答》(2. Aufl.), 4-22 “怎样根据浇注重量计算铸件的浇注时间”.Gießzeit t = S·∛(δ·G); S 1,7–2,0 für Gusseisen, 1,4 für Stahl.
  28. “大型铸铁件浇注工艺研究及计算公式” / jishulink “浇铸时间如何确定”.Mittlere und große Eisengussteile, mit der mittleren Wanddicke.
  29. Scholer (nach der Tabelle von Sobolev und Dubitsky), “Steel Pouring Times”.Ts = S·(V·G)^0,333.
  30. J. Kavuličová, D. Ivánová, J. Ďurišin, G. Sučik, M. Škrobian, “Calculation of liquidus temperature for steel by Le Châtelier-Shreder and van Laar-Bowen equations”, Kovove Materialy 44 (2006) 181–184.
  31. Rolled Alloys, Datenblatt 2205 Duplex Stainless.Schmelzbereich.
  32. Ö. Hammar, U. Svensson, “Influence of steel composition on segregation and microstructure during solidification of austenitic stainless steels”, Solidification and Casting of Metals, The Metals Society, London, 1979, 401–410.
  33. N. Suutala, “Effect of solidification conditions on the solidification mode in austenitic stainless steels”, Metallurgical Transactions A 14 (1983) 191–197.
  34. Heraeus Electro-Nite, thermische Analyse von Gusseisen (IBT, “Thermal Analysis of Cast Iron”).T_L = 1623,6 − 112,36·(C + Si/4 + P/2).
  35. Formelsammlungen zur Stahlerzeugung (163.com “炼钢系统各种计算公式汇总”, sohu.com).1536-Liquidusformel; ursprünglicher Autor nicht angegeben.
  36. K. Peaslee, V. Richards, J. Smith (Missouri University of Science and Technology), Melting Efficiency Improvement, Final Technical Report, U.S. DOE, OSTI 1051407, Tabelle 3.Schmelzaufzeichnungen des mit dem Programm gelieferten Beispielofens.
  37. Heine, Gießzeit für Gusseisen mit Kugelgraphit: t = A·√G, A = 1.7.Gießzeitkoeffizient für Gusseisen mit Kugelgraphit unter 350 kg.
  38. Dietert: t = k·√w, k 1,0–1,5 (bei großen Gussteilen der kleinere Wert).Quadratwurzel-Beziehung unter 350 kg.
  39. Karsay: Quadratwurzel-Beziehung für die Gießzeit, t = s·√G.Quadratwurzel-Beziehung unter 350 kg (zusammen mit Dietert).

JoseCast Analyzer

Lattice Boltzmann, Strömung und freie Oberfläche JoseCast Analyzer · 25

  1. Bhatnagar, P.L., Gross, E.P., Krook, M. (1954). A model for collision processes in gases. Phys. Rev. 94, 511–525.
  2. Bogner, S., Rüde, U., Harting, J. (2016). Curvature estimation from a volume-of-fluid indicator function for the simulation of surface tension and wetting with a free-surface lattice Boltzmann method. Phys. Rev. E 93, 043302.
  3. Bouzidi, M., Firdaouss, M., Lallemand, P. (2001). Momentum transfer of a Boltzmann-lattice fluid with boundaries. Phys. Fluids 13, 3452.
  4. Ding, H., Spelt, P.D.M. (2007). Wetting condition in diffuse interface simulations of contact line motion. Phys. Rev. E 75, 046708.
  5. Dojka, M., Jezierski, J., Szucki, M. (2022). Materials 15, 4937.
  6. Dupuis, A., Chopard, B. (2003). Theory and applications of an alternative lattice Boltzmann grid refinement algorithm. Phys. Rev. E 67, 066707.
  7. Ergun, S. (1952). Fluid flow through packed columns. Chem. Eng. Prog. 48, 89–94.
  8. Guo, Z., Zheng, C., Shi, B. (2002). Discrete lattice effects on the forcing term in the lattice Boltzmann method. Phys. Rev. E 65, 046308.
  9. Hou, S., Sterling, J., Chen, S., Doolen, G.D. (1996). A lattice Boltzmann subgrid model for high Reynolds number flows. Fields Inst. Commun. 6, 151–166.
  10. Huh, C., Scriven, L.E. (1971). Hydrodynamic model of steady movement of a solid/liquid/fluid contact line. J. Colloid Interface Sci. 35, 85–101.
  11. Körner, C., Thies, M., Hofmann, T., Thürey, N., Rüde, U. (2005). Lattice Boltzmann model for free surface flow for modeling foaming. J. Stat. Phys. 121, 179–196.
  12. Krüger, T. et al. (2017). The Lattice Boltzmann Method: Principles and Practice. Springer.
  13. Ladd, A.J.C. (1994). Numerical simulations of particulate suspensions via a discretized Boltzmann equation. Part 1. J. Fluid Mech. 271, 285–309.
  14. Latt, J., Chopard, B. (2006). Lattice Boltzmann method with regularized pre-collision distribution functions. Math. Comput. Simul. 72, 165–168.
  15. Malaspinas, O., Sagaut, P. (2014). Wall model for large-eddy simulation based on the lattice Boltzmann method. J. Comput. Phys. 275, 25–40.
  16. Pope, S.B. (2000). Turbulent Flows. Cambridge University Press.
  17. Qian, Y.H., d'Humières, D., Lallemand, P. (1992). Lattice BGK models for Navier–Stokes equation. Europhys. Lett. 17, 479–484.
  18. Rohde, M., Kandhai, D., Derksen, J.J., van den Akker, H.E.A. (2006). A generic, mass conservative local grid refinement technique for lattice-Boltzmann schemes. Int. J. Numer. Meth. Fluids 51, 439–468.
  19. Schornbaum, F., Rüde, U. (2016). Massively parallel algorithms for the lattice Boltzmann method on nonuniform grids. SIAM J. Sci. Comput. 38, C96–C126.
  20. Schwarzmeier, C. et al. (2022). Comparison of refilling schemes in the free-surface lattice Boltzmann method. AIP Advances 12, 115324.
  21. Schwarzmeier, C. et al. (2023). Analysis and comparison of boundary condition variants in the free-surface lattice Boltzmann method. Int. J. Numer. Methods Fluids.
  22. Smagorinsky, J. (1963). General circulation experiments with the primitive equations. Mon. Weather Rev. 91, 99–164.
  23. Spalding, D.B. (1961). A single formula for the law of the wall. J. Appl. Mech. 28, 455–458.
  24. Taniguchi, S., Maeda, Y. (2020). Mater. Trans. 61(10), 1981.
  25. Thürey, N. (2007). Physically based animation of free surface flows with the lattice Boltzmann method. Dissertation, FAU Erlangen-Nürnberg.

Rheologie, Zweiphasengebiet und Werkstoffe JoseCast Analyzer · 14

  1. Andrade, E.N. da C. (1934). A theory of the viscosity of liquids. Phil. Mag. 17, 497–511.
  2. Casson, N. (1959). A flow equation for pigment-oil suspensions of the printing ink type. Rheology of Disperse Systems, Pergamon.
  3. Cheng, D.C.-H., Evans, F. (1965). Br. J. Appl. Phys. 16, 1599.
  4. Cross, M.M. (1965). Rheology of non-Newtonian fluids: a new flow equation for pseudoplastic systems. J. Colloid Sci. 20, 417–437.
  5. Herschel, W.H., Bulkley, R. (1926). Konsistenzmessungen von Gummi-Benzollösungen. Kolloid-Z. 39, 291–300.
  6. Imagumbai, M. (1994). Relationship between primary- and secondary-dendrite arm spacing of C-Mn steel uni-directionally solidified in steady state. ISIJ Int. 34(12), 986–991.
  7. Moore, F. (1959). The rheology of ceramic slips and bodies. Trans. Br. Ceram. Soc. 58, 470–494.
  8. Mullineux, G. (2008). Non-linear least squares fitting of coefficients in the Herschel–Bulkley model. Appl. Math. Model. 32, 2538–2551.
  9. Schneider, M.C., Gu, J.P., Beckermann, C., Boettinger, W.J., Kattner, U.R. (1997). Modeling of micro- and macrosegregation and freckle formation in single-crystal nickel-base superalloy directional solidification. Metall. Mater. Trans. A 28, 1517–1531.
  10. Thomas, D.G. (1965). Transport characteristics of suspension: VIII. A note on the viscosity of Newtonian suspensions of uniform spherical particles. J. Colloid Sci. 20, 267–277.
  11. Torabi Rad, M., Kotas, P., Beckermann, C. (2013). Rayleigh number criterion for formation of A-segregates in steel castings and ingots. Metall. Mater. Trans. A 44(9), 4266–4281. DOI 10.1007/s11661-013-1761-4
  12. Voller, V.R., Prakash, C. (1987). A fixed grid numerical modelling methodology for convection-diffusion mushy region phase-change problems. Int. J. Heat Mass Transfer 30, 1709–1719.
  13. Yu et al. (2020). ISIJ International 60(8) (304/316 SDAS).
  14. Zhao et al. (2024). J. Mater. Res. Technol. 31, 635 (Dendritenarmabstand von CrMo-Stahlguss).

Wärmeübertragung und Erstarrung JoseCast Analyzer · 10

  1. Blazek, J. (2015). Computational Fluid Dynamics: Principles and Applications, 3. Aufl. Elsevier.
  2. Bonacina, C., Comini, G., Fasano, A., Primicerio, M. (1973). Numerical solution of phase-change problems. Int. J. Heat Mass Transfer 16, 1825–1832.
  3. Carslaw, H.S., Jaeger, J.C. (1959). Conduction of Heat in Solids, 2nd ed. Oxford University Press.
  4. Chvorinov, N. (1940). Theorie der Erstarrung von Gußstücken. Giesserei 27, 177–186.
  5. Hestenes, M.R., Stiefel, E. (1952). Methods of conjugate gradients for solving linear systems. J. Res. Natl. Bur. Stand. 49, 409–436.
  6. Patankar, S.V. (1980). Numerical Heat Transfer and Fluid Flow. Hemisphere.
  7. Scheil, E. (1942). Bemerkungen zur Schichtkristallbildung. Z. Metallkd. 34, 70–72.
  8. Vergnano, A., Facondini, G., Morselli, A., Veronesi, P., Leali, F. (2024) (Wärmeübergangskoeffizient Metall–Form im Nassguss).
  9. Voller, V.R., Swaminathan, C.R. (1991). General source-based method for solidification phase change. Numer. Heat Transfer B 19, 175–189.
  10. Williams, T.J., Hardin, R.A., Beckermann, C. (2016). Thermophysical properties and performance of riser sleeves for steel castings. Int. J. Metalcast. 10(4), 535–555.

Speisung, Lunker, Porosität JoseCast Analyzer · 6

  1. Campbell, J. Complete Casting Handbook. Butterworth-Heinemann.
  2. Carlson, K.D., Beckermann, C. (2009). Prediction of shrinkage pore volume fraction using a dimensionless Niyama criterion. Metall. Mater. Trans. A 40, 163–175.
  3. Heuversche Kreisregel (wie bei Campbell wiedergegeben).
  4. Niyama, E., Uchida, T., Morikawa, M., Saito, S. (1982). A method of shrinkage prediction and its application to steel casting practice. AFS Int. Cast Metals J. 7(3), 52–63.
  5. Ransley, C.E., Neufeld, H. (1948). The solubility of hydrogen in liquid and solid aluminium. J. Inst. Metals 74, 599–620.
  6. Wlodawer, R. (1966). Directional Solidification of Steel Castings. Pergamon.

Gas und Sand JoseCast Analyzer · 5

  1. Klinkenberg, L.J. (1941). The permeability of porous media to liquids and gases. API Drilling and Production Practice, 200–213.
  2. Kozeny, J. (1927); Carman, P.C. (1937). Permeabilitätsbeziehung für poröse Medien.
  3. Shields, A. (1936). Anwendung der Ähnlichkeitsmechanik und der Turbulenzforschung auf die Geschiebebewegung. Berlin.
  4. Sutherland, W. (1893). The viscosity of gases and molecular force. Phil. Mag. 36, 507–531.
  5. Thole, J., Beckermann, C. (2010). Measurement of elastic modulus of PUNB bonded sand as a function of temperature. Int. J. Metalcasting 4(4), 7–18.

Erosion und Kaltläufe JoseCast Analyzer · 2

  1. Bitter, J.G.A. (1963). A study of erosion phenomena. Wear 6, 5–21, 169–190.
  2. Finnie, I. (1960). Erosion of surfaces by solid particles. Wear 3, 87–103.

Geometrie und numerische Algorithmen JoseCast Analyzer · 5

  1. Beucher, S., Meyer, F. (1993). The morphological approach to segmentation: the watershed transformation. Mathematical Morphology in Image Processing, 433–481.
  2. Dijkstra, E.W. (1959). A note on two problems in connexion with graphs. Numer. Math. 1, 269–271.
  3. Felzenszwalb, P.F., Huttenlocher, D.P. (2012). Distance transforms of sampled functions. Theory of Computing 8, 415–428.
  4. Möller, T., Trumbore, B. (1997). Fast, minimum storage ray-triangle intersection. J. Graphics Tools 2(1), 21–28.
  5. Tarjan, R.E. (1975). Efficiency of a good but not linear set union algorithm. J. ACM 22, 215–225.

Normen und Werkstoffveröffentlichungen JoseCast Analyzer · 6

  1. EN 1561:2011 (Gusseisen mit Lamellengraphit), EN 1563:2011 (Gusseisen mit Kugelgraphit), EN 16079 (Gusseisen mit Vermiculargraphit), EN 12513 (verschleißbeständiges Gusseisen).
  2. EN 10083-2/-3, EN 10084, EN ISO 683-17, EN 10088, EN 10213, EN 10293, EN 10349, EN 10283; ASTM A128, A439, A532.
  3. Nickel Institute (2021). Properties and applications of Ni-Hard alloys (Veröffentlichung 11017, 2. Aufl.).
  4. Nickel Institute. Properties and Applications of Ni-Resist and Ductile Ni-Resist Alloys (Veröffentlichung 11018).
  5. Aktaş Çelik, G. (2024). Simulation of the solidification behaviour and metallurgical characterisation of NiHard-4 white cast iron. J. Fac. Eng. Uludağ Univ. 29(2). DOI 10.17482/uumfd.1432823
  6. Roučka, J., Abramová, E., Kaňa, V. (2018). Properties of type SiMo ductile irons at high temperatures. Arch. Metall. Mater. 63(2), 601–607.

Thermodynamik JoseCast Analyzer · 1

  1. pycalphad (quelloffene CALPHAD-Bibliothek) und die mit dem Programm verbreiteten TDB-Datenbanken.

Einige Quellen, die im Programmcode zitiert werden, deren vollständige Angabe wir aber nicht finden und überprüfen konnten, sind in dieser Liste nicht enthalten. Bis zur Überprüfung bleiben sie im Literaturdokument des Programms als „nicht überprüft“ gekennzeichnet.